2004-2009 Ferrari F430 Spider Workshop Manual

$39.99

Category: Tags: , ,

Covers: 2004, 2005, 2006, 2007, 2008, 2009 Ferrari F430 Spider (F136E motor)
Pages: 1,269
Format: PDF file
File size: 190mb
Compatibility: Windows/Mac/Tablet
File details: Bookmarked: Yes, Searchable: Yes, Printable: Yes
Note: Instant digital download only – no CD-ROM or printed copy included.

This PDF workshop manual contains all the necessary instructions needed for any repair your 2004-2009 Ferrari F430 Spider may require from bumper to bumper. This is the same workshop manual technicians use to diagnose and repair your 2004-2009 Ferrari F430 Spider. Whether its routine maintenance, such as tune-ups and brake service, or more extensive repairs involving engine and transmission disassembly, this workshop manual provides the most reliable information to perform the job.

Topics included in the 2004-2009 Ferrari F430 Spider Workshop Manual:

General Information
A CAPACITIES AND MAINTENANCE
A1 CAPACITIES
A1.01 CHARACTERISTICS OF THE FLUIDS USED
A1.02 REFILL SERVICING TABLE
A2 SCHEDULED MAINTENANCE SERVICES
A2.01 PRE-DELIVERY CHECKS
A3 MAINTENANCE PROCEDURES
A3.01 LEVEL CHECK AND REPLACEMENT OF ENGINE OIL AND FILTER
A3.02 CHECKING AND CHANGING THE GEARBOX-DIFFERENTIAL OIL
A3.03 REPLACING THE AUXILIARY DEVICES BELT
A3.04 CHECKING AND AND REPLACING THE SPARK PLUGS
A3.05 CHECKING THE BLOW-BY SYSTEM LINES AND CONNECTIONS
A3.06 CHECKING THE COOLING SYSTEM LINES AND CONNECTIONS
A3.07 CHECKING THE INJECTION AND IGNITION SYSTEM LINES AND CONNECTIONS
A3.08 REPLACING THE ACTIVE CARBON FILTER
A3.09 REPLACING THE OXYGEN SENSOR AND THERMOCOUPLE
A3.10 REPLACING THE AIR FILTERS
A3.11 REPLACING THE AIR CONDITIONING AND HEATING SYSTEM’S FILTER
A3.12 CHECKING THE EXHAUST SYSTEM CONNECTIONS
A3.13 CHECKING THE EMISSION LEVELS
A3.14 CHECKING THE BRAKE AND CLUTCH SYSTEM FLUID LEVELS
A3.15 CHECKING THE OIL LEVEL FOR THE “F1” GEARBOX SYSTEM AND ELECTRONIC
DIFFERENTIAL
A3.16 CHECKING THE HYDRAULIC STEERING FLUID LEVEL
A3.17 INSPECTING THE THE BRAKING SYSTEM
A3.18 CHECKING THE SERVICE BRAKES AND REPLACING THE PADS
A3.19 CHECKING THE SERVICE/PARKING BRAKE OPERATION AND BACKLASH CONTROL
A3.20 CHECKING THE SUSPENSION COMPONENTS
A3.21 CHECKING THE STEERING COMPONENTS
A3.22 CHECKING THE VEHICLE GEOMETRY
A3.23 INSPECTING THE AIR CONDITIONING AND HEATING SYSTEM
A3.24 CHECKING AND LUBRICATING THE HINGES AND ADJUSTMENT PARTS
A3.25 CHECKING THE OPERATION AND FASTENING OF THE SEATS AND SEAT BELTS
A3.26 CHECKING AND RECHARGING THE BATTERY
A3.27 CHECKING ABSORPTION AND RE-CHARGING THE ALTERNATOR
A3.28 CHECKING THE HEADLIGHT AIMING
A3.29 CHECKING THE METAL SHEETS AND CHASSIS
A3.30 AIRBAG REPLACEMENT
A3.31 REPLACING THE PRETENSIONERS
A3.32 LEATHER INTERIOR TREATMENT
A3.33 CHECKING THE WHEELS AND TYRES
B ENGINE
B1 GENERAL INFORMATION
B1.01 TECHNICAL FEATURES
B1.02 SPECIFIC TOOLING/EQUIPMENT
B1.03 TIGHTENING TORQUES
B2 REMOVING THE COMPLETE ENGINE ASSEMBLY
B2.01 REMOVING THE COMPLETE ENGINE ASSEMBLY
B2.02 REFITTING THE COMPLETE ENGINE ASSEMBLY
B3 ENGINE OVERHAUL
B3.01 COUPLING DATA AND WEAR LIMITS
B3.02 REMOVING THE COMPONENTS
B3.03 CHECKING THE COMPONENTS
B3.04 REFITTING THE COMPONENTS
B3.05 HYDRAULIC SEAL TEST
B4 LUBRICATION SYSTEM
B4.01 SYSTEM DIAGRAM
B4.02 OIL FILTER
B4.03 OIL TANK
B4.04 OIL GAS AND VAPOUR RECIRCULATION
B5 COOLING SYSTEM
B5.01 SYSTEM DIAGRAM
B5.02 WATER/OIL PUMP
B5.03 THERMOSTATIC VALVE
B5.04 WATER RADIATORS
B5.05 EXPANSION TANK
B5.06 WATER/OIL HEAT EXCHANGER
B5.07 FILLING THE SYSTEM
B6 FUEL SUPPLY SYSTEM
B6.01 FUEL SUPPLY SYSTEM DIAGRAM
B6.02 FUEL VAPOUR EMISSIONS DIAGRAM
B6.03 FUEL PUMP UNIT
B6.04 FUEL LEVEL GAUGE
B6.05 PRESSURE REGULATOR
B6.06 MULTI-FUNCTION AND VENTILATION VALVES
B6.07 FUEL TANK
B6.08 MOTOR-DRIVEN THROTTLE BODY
B6.09 FUEL SUPPLY SYSTEM PRESSURE TEST
B7 AIR INTAKE AND EXHAUST SYSTEM
B7.01 AIR INTAKE SYSTEM
B7.02 INTAKE MANIFOLD
B7.03 AIR INTAKE
B7.04 PNEUMATIC ACTUATION SYSTEM
B7.05 EXHAUST SYSTEM DIAGRAM
B7.06 CATALYTIC CONVERTER
B7.07 SILENCER
B7.08 EXHAUST MANIFOLD
C INJECTION-IGNITION
C1 GENERAL INFORMATION
C1.01 SPECIFICATIONS
C1.02 TIGHTENING TORQUES
C2 SENSORS
C2.01 TIMING SENSOR
C2.02 RPM SENSOR
C2.03 AIR FLOW METER
C2.04 COOLANT TEMPERATURE SENSOR
C2.05 ACCELERATOR PEDAL POSITION SENSOR
C2.06 OXYGEN SENSORS (LAMBDA SENSOR)
C2.07 DETONATION SENSOR
C3 ACTUATORS
C3.01 FUEL PUMP
C3.02 ELECTRO-INJECTORS
C3.03 COIL
C3.04 TIMING VARIATOR CONTROL SOLENOID VALVE
C3.05 EXHAUST BY-PASS SOLENOID VALVE
C3.06 SOLENOID VALVE FOR INTAKE MANIFOLD ACTUATION
C3.07 DIAGNOSTICS PUMP AND FILTER
C3.08 ANTI-EVAPORATION SYSTEM SOLENOID VALVE
C4 PROCEDURES
C4.01 REPLACING THE MOTRONIC ECU
D CLUTCH – GEARBOX – DIFFERENTIAL
D1 GENERAL INFORMATION
D1.01 TECHNICAL FEATURES
D1.02 SPECIFIC TOOLING/EQUIPMENT
D1.03 STANDARD TOOLING/EQUIPMENT
D1.04 TIGHTENING TORQUES
D2 DETACHING THE ENTIRE GEARBOX- DIFFERENTIAL ASSEMBLY
D2.01 REMOVING THE COMPLETE GEARBOX-DIFFERENTIAL ASSEMBLY
D2.02 REFITTING THE COMPLETE GEARBOX-DIFFERENTIAL ASSEMBLY
D3 CLUTCH
D3.01 REPLACING THE COMPONENTS
D3.02 ADJUSTING THE CLUTCH PEDAL TRAVEL (MECHANICAL GEARBOX)
D3.03 CLUTCH CONTROL HYDRAULIC SYSTEM
D3.04 SYSTEM BLEEDING
D4 GEARBOX
D4.01 REPLACING THE EXTERNAL COMPONENTS
D4.02 REPLACING AND ADJUSTING THE CONTROL CABLES (MECHANICAL GEARBOX)
D4.03 REPLACING THE GEARBOX LEVER HOUSING (MECHANICAL GEARBOX)
D4.04 REMOVING/REFITTING THE GEARBOX MOUNTING MOVABLE FRAME
D4.05 GEARBOX OVERHAUL
D5 DIFFERENTIAL – AXLE SHAFTS
D5.01 REPLACING THE COMPONENTS
D5.02 ELECTRONIC DIFFERENTIAL (E-DIFF)
D5.03 AXLE SHAFT
D6 ELECTRONICALLY-CONTROLLED GEARBOX (F1)
D6.01 GENERAL INFORMATION
D6.02 REPLACING THE ELECTRONIC CONTROL UNIT (TCU)
D6.03 HYDRAULIC SYSTEM
D6.04 POWER UNIT
D6.05 ACTUATORS
D6.06 MEASURING SENSORS AND SIGNAL SWITCHES
D6.07 F1 CONTROLS
D6.08 CENTRING THE GEAR SHIFT-SELECTION ACTUATOR LEVER (FINGER)
E STEERING
E1 GENERAL INFORMATION
E1.01 TECHNICAL FEATURES
E1.02 HYDRAULIC SYSTEM DIAGRAM
E1.03 TIGHTENING TORQUES
E2 COMPONENTS
E2.01 HYDRAULIC STEERING PUMP
E2.02 STEERING BOX
E2.03 HYDRAULIC STEERING TANK
E2.04 COOLING COIL
E2.05 STEERING COLUMN
E3 PROCEDURES
E3.01 FILLING THE HYDRAULIC STEERING PUMP
E3.02 FILLING AND DRAINING THE SYSTEM
F SUSPENSIONS AND WHEELS
F1 GENERAL INFORMATION
F1.01 TECHNICAL FEATURES
F1.02 TIGHTENING TORQUES
F1.03 SPECIFIC TOOLING/EQUIPMENT
F2 COMPONENTS
F2.01 HUB-HOLDER STUB AXLE
F2.02 WHEEL BEARINGS
F2.03 SUSPENSION ARMS AND TIE-RODS
F2.04 FLAMBLOCK – BALL JOINTS
F2.05 SHOCK ABSORBERS
F2.06 STABILIZER BARS
F2.07 WHEEL RIMS
F2.08 TYRES
F3 PROCEDURES
F3.01 REMOVING THE COMPLETE FRONT SUSPENSION
F3.02 REMOVING THE COMPLETE REAR SUSPENSION
F3.03 REPLACING THE FRONT WHEEL BEARING
F3.04 REPLACING THE REAR WHEEL BEARING
F3.05 CHECKING AND ADJUSTING WHEEL ALIGNMENT
F3.06 WHEEL REPLACEMENT
F3.07 WHEEL BALANCING
F4 SHOCK CALIBRATION SYSTEM
F4.01 SYSTEM DIAGRAM
F4.02 SYSTEM COMPONENTS
F5 TYRE PRESSURE MONITORING SYSTEM (OPTIONAL)
F5.01 SYSTEM DIAGRAM
F5.02 COMPONENTS
G CST AND BRAKING SYSTEM
G1 GENERAL INFORMATION
G1.01 TECHNICAL FEATURES
G1.02 BRAKING SYSTEM DIAGRAM
G1.03 TIGHTENING TORQUES
G2 COMPONENTS
G2.01 BRAKE SERVO / PUMP
G2.02 BRAKE FLUID TANK
G2.03 PEDAL BOARD
G2.04 BRAKE CALIPERS
G2.05 BRAKE DISCS
G2.06 HAND BRAKE
G2.07 ABS/ASR ELECTRO-HYDRAULIC UNIT
G3 PROCEDURES
G3.01 REPLACING THE SERVICE BRAKE CALIPERS
G3.02 FILLING AND BLEEDING THE BRAKE SYSTEM
G3.03 REPLACING THE HAND BRAKE PADS
G3.04 REPLACING THE HAND BRAKE CALIPER
G3.05 HAND BRAKE ADJUSTMENT
G3.06 ADJUSTING THE BRAKE PEDAL AND BRAKE SWITCH POSITION
G4 CST SYSTEM
G4.01 CST SYSTEM FEATURES
G4.02 CST COMPONENTS
H INSTRUMENTS AND CONTROLS
H1 INSTRUMENTS
H1.01 INSTRUMENT PANEL
H1.02 WARNING LIGHTS
H1.03 MULTI-FUNCTION DISPLAY
H1.04 INSTRUMENT FUNCTION AND CLOCK ADJUSTMENT BUTTONS
H1.05 TIGHTENING TORQUES
H2 CONTROLS
H2.01 POSITIONS IN THE VEHICLE
H2.02 IGNITION SWITCH
H2.03 SWITCHES/PUSH BUTTONS
H2.04 DOOR CONTROLS
H2.05 POWER WINDOWS
H2.06 STEERING WHEEL
H2.07 STEERING WHEEL LEVERS
H2.08 INTERNAL AND EXTERNAL REAR VIEW MIRRORS
H2.09 INTERNAL LIGHTS
H2.10 HAND BRAKE LEVER
H2.11 GEAR SELECTION LEVER (MECHANICAL GEARBOX)
H2.12 ASHTRAY – CIGARETTE LIGHTER
H2.13 LID AND FUEL TANK DOOR OPENING DEVICES
H2.14 SEAT CONTROL
H2.15 RADIO SYSTEM AND ACCESSORIES
H2.16 ACCELERATOR CONTROL
H3 SAFETY SYSTEMS
H3.01 ALARM SYSTEM
H3.02 AIRBAG
H3.03 SEAT BELTS
H3.04 INERTIA SWITCH
H3.05 EXTINGUISHER (OPTIONAL)
H4 DRIVING THE VEHICLE
H4.01 BREAKING IN
H4.02 IGNITION AND GEAR SHIFTING (MECHANICAL GEARBOX)
H4.03 IGNITION AND GEAR SHIFTING (ELECTRONICALLY-CONTROLLED GEARBOX)
H4.04 DRIVING THE VEHICLE
H4.05 PARKING
I AIR CONDITIONING AND HEATING SYSTEM
I1 GENERAL INFORMATION
I1.01 SYSTEM DIAGRAM
I1.02 CONTROLS
I1.03 TIGHTENING TORQUES
I2 COMPONENTS
I2.01 COMPRESSOR
I2.02 CONDENSER
I2.03 DEHYDRATOR FILTER
I2.04 PRESSURE SWITCH
I2.05 EXPANSION VALVE
I2.06 HEATER / EVAPORATOR
I2.07 PROPORTIONAL VALVE (TGK)
I2.08 RECIRCULATION PUMP
I2.09 SENSORS
I2.10 ADJUSTMENT ECU
I3 MAINTENANCE PROCEDURES
I3.01 SYSTEM BLEEDING
I3.02 SYSTEM FILLING
I4 CHECKS
I4.01 CHECKING AND TOPPING UP THE COMPRESSOR OIL LEVEL
I4.02 CHECKING THE EXPANSION VALVE
I4.03 CHECKING THE PRESSURE GAUGE
I4.04 CHECKING THE ELECTRIC FAN OPERATION
L ELECTRICAL SYSTEM
L1 GENERAL INFORMATION
L1.01 SPECIFICATIONS
L1.02 KEY-OPERATED CIRCUITS
L1.03 LIGHTS
L1.04 TIGHTENING TORQUES
L2 COMPONENTS
L2.01 BATTERY
L2.02 BATTERY MASTER SWITCH
L2.03 GENERATOR/ALTERNATOR
L2.04 STARTER MOTOR
L2.05 WINDSCREEN WIPER MOTOR
L2.06 HEADLIGHTS
L2.07 TAILLIGHTS
L2.08 DIRECTION INDICATORS
L2.09 ECU LOCATION
L2.10 FUSES AND RELAYS BOXES
L2.11 HORN
L2.12 DIAGNOSIS TESTER PLUG
L3 OPERATIONS AND CHECKS
L3.01 CHECKING THE ELECTRICAL SYSTEM ABSORPTION
L3.02 CHECKING THE BATTERY CHARGE LEVEL
L3.03 RECHARGING THE BATTERY
M BODYWORK PARTS
M1 GENERAL INFORMATION
M1.01 TIGHTENING TORQUES
M2 EXTERNAL PARTS
M2.01 ENGINE COMPARTMENT LID
M2.02 LUGGAGE COMPARTMENT LID
M2.03 FRONT BUMPER
M2.04 REAR BUMPER
M2.05 WHEELHOUSE
M2.06 WINDSCREEN
M2.07 WINDSCREEN WIPERS
M2.08 WINDSCREEN WASHER
M2.09 WINDSCREEN OUTER-EDGE STRIP
M2.10 DOOR BAY STRIPS AND COVERING
M2.11 DOORS
M2.12 UNDERFLOOR SECTIONS
M2.13 ENGINE COMPARTMENT GUARDS
M2.14 HEADLIGHT WASHERS
M2.15 FUEL TANK FILLER NECK
M2.16 FUEL TANK CAP FLAP
M3 INTERNAL COMPONENTS
M3.01 DASHBOARD
M3.02 TUNNEL
M3.03 SEATS
M3.04 PASSENGER COMPARTMENT TRIM PANELS
M3.05 ENGINE INSPECTION LID
M3.06 LUGGAGE COMPARTMENT COVERING PANEL
M4 PAINTING
M4.01 SANDING AND CLEANING
M4.02 USE OF HARDENERS AND DILUENTS
M4.03 PREPARING AND PAINTING THE ALUMINIUM SHEETS
N SOFT TOP
N1 SOFT TOP SYSTEM
N1.01 GENERAL INFORMATION
N1.02 SPECIFIC TOOLING AND TIGHTENING TORQUES
N1.03 CONTROLS AND SIGNALS
N1.04 ECU
N1.05 POSITION SENSORS
N1.06 HYDRAULIC SYSTEM
N1.07 TOP OPENING/CLOSING SEQUENCE
N1.08 TOP EMERGENCY CLOSING
N1.09 ACTUATORS
N2 PROCEDURES WITH THE SOFT TOP INSTALLED
N2.01 REMOVING THE COMPLETE SOFT TOP
N2.02 RE-ASSEMBLING THE COMPLETE SOFT TOP
N2.03 REPLACING THE EXTERNAL TRIM PANEL
N2.04 REPLACING THE INSIDE TRIM PANEL
N2.05 REPLACING THE SOFT TOP REAR WINDOW
N2.06 REPLACING THE FRONT ROOF FRAME STRIP
N2.07 REPLACING THE SLAT WITH THE REAR ROOF FRAME STRIP
N2.08 REPLACING THE PILLAR WITH STRIP
N2.09 REPLACING THE REAR ARCH STRIP
N2.10 REPLACING THE TENSIONING ROPES FOR THE EXTERNAL LINING
N2.11 REPLACING THE GROOVED PIN AND THE MAIN MOUNT ARTICULATED LEVER
N2.12 REPLACING THE FINNED POCKET SUPPORT JOINT TIE-ROD (TRIPLE JOINT)
N2.13 REPLACING THE COMPLETE SWING ARM
N2.14 REPLACING THE UNION ARM AND STRIP
N2.15 REPLACING THE REAR ROLL-BAR COVER
N2.16 REPLACING THE SOFT TOP RETAINER FLAP INSIDE THE BAY
N2.17 REPLACING THE THE SIDE FLAP MOTOR TRANSMISSION CABLE
N2.18 REPLACING THE FRONT ROOF FRAME MICRO-SWITCHES
N2.19 REPLACING THE COMPLETE CLOSING SETS AND RACKS
N2.20 REPLACING THE PISTON CONTROLLING THE SOFT TOP CLOSING HOOKS
N2.21 REPLACING THE PISTON LINE CONTROLLING THE FRONT ROOF FRAME
N2.22 REPLACING THE REAR COVER AND ITS MICROSWICTHES
N2.23 REPLACING THE SIDE FLAP
N2.24 REPLACING THE REAR KINEMATIC MECHANISM
N2.25 REPLACING THE SOFT TOP POSITION MICROSWITCHES IN THE BAY
N2.26 REPLACING THE LEATHER ROLL-BAR COVERING
N3 PROCEDURES WITH THE SOFT TOP REMOVED
N3.01 REPLACING THE FRONT ROLL-BAR COVERING AND SIDE FLAP MOUNTS
N3.02 REPLACING THE SOFT TOP HOUSING BAY STRIPS
N3.03 REPLACING THE MAIN PISTON
N3.04 REPLACING THE COVER DRIVING PISTON
N3.05 REPLACING THE HYDRAULIC UNIT
N4 ADJUSTMENTS
N4.01 ADJUSTING THE PRESSURE OF THE FINNED POCKETS ON THE COVER
N4.02 ADJUSTING THE SIDE FLAPS
N5 DIAGNOSIS
N5.01 DIAGNOSIS

Example manual details (actual manual may vary):

car-manual-samplewm
car-manual-elec-samplewm

How does this work?

It’s simple – after purchasing this manual through our secure checkout, a download link will be sent to the email address you specify. You have up to 30 days to retrieve and save the file. After that it is yours for good.

Have any questions or need more details? Contact Us

Reviews

There are no reviews yet.

Be the first to review “2004-2009 Ferrari F430 Spider Workshop Manual”

Your email address will not be published. Required fields are marked *